Valve seat grinding wheels.
Kinik

Grinding wheels
Crystec Technology Trading GmbH

Crystec Company Overview
Content CCE email English    deutsch    français    romana    russki
grinding wheels   centerless   cylindrical   internal   surface   gear   valve   cam   crank shaft   grinding technology

Valve seat grinding wheels

Kinik valve seat, valve face and valve end grinding wheels brings you a full assortment of replacement wheels for all major manufacturer equipment.

Grinding wheels for valve seats Valve seat grinding wheels

Valve Seat Grinding Wheel Recommendations

valve seat grinding wheel recommendations

Valve seat grinding wheels have to be specified:

91 15/30 38 x 25 x 9/16"-16NC RA80RV
shape face D x T x Thread Spec

Valve Seat Grinding Wheel Shape

valve seat grinding wheel shape valve seat grinding wheel shape valve seat grinding wheel shape valve seat grinding wheel shape valve seat grinding wheel shape
type 90 type 91 type 92 type 93 type 94

Valve Seat Grinding Wheel Face

Standard Wheel Face Angles: 15, 30, 45, 90(Flat)

Valve Face Grinding Wheels (Type 13, 14, 14-1) Valve End (Butt) Grinding Wheels (Type 6-2)
valve seat grinding wheel face valve seat grinding wheel face valve seat grinding wheel face valve seat grinding wheel face

valve seat grinding wheel face

Special Face(15) may be supplied on request.


Valve Seat Grinding Wheels Dimensions

Valve Seat Grinding Wheels Dimensions

Standard Bushing (Threads): 9/16"-16NC, 9/16"-16NCLH, 9/16"-18NF, 5/8"-11NC, 5/8"-18NF, 5/8"-18NFLH, 11/16"-16NCLH, 11/16"-18NF, 13/16"-13NC


Dressing and truing of grinding wheels

The purpose of the dressing and truing is to restore the original cutting geometry and to correct the flatness and roundness of the grinding wheel. This is done in many cases by diamond dressers.

Abrasives, grinding wheel material

Grinding machines can be equipped with different grinding wheels. The grinding wheels can consist of aluminium oxide Al2O3, cubic boron nitride cBN or diamond. cBN and diamond grinding wheels are very hard and can be used for high precision grinding of very hard parts. The life time is very high. Diamond wheels have some limitation for grinding steel because of the solubility of carbon in iron.

Mesh size

The grain size of the abrasive material of a grinding wheel is determined by the mesh size of the sieve that is used for the selection of the material. The mesh size is therefore a measure of the roughness of the grinding wheel and determines the removal rate and the surface roughness of the workpiece after grinding.

rough medium fine very fine ultra fine
10 12 14
16 20 24
30 36 46
54 60
70 80 90 100
120 150 180 220
240 280 320 400
500 600 700 800
1000 1200 1500 2000
2500 3000 4000 6000

Bonding

Bonding of the abrasiv material can be vitrified, metallic or resin. Vitrified bonding is used frequently. High stock removal rates can be achieved and the rigidity allows high precision grinding. This bonding is not sensitive to water, acid, oil and it is not temperature sensitive either. Resin bonding is rather soft and is used to achieve very smooth surfaces. Metallic bonding is used for special purposes, e.g. for electrical discharge truing. Regulation and feed wheels use rubber bonding.

very soft soft medium hard very hard
D E F G H I J K L M N O P Q R S T U V W X Y Z

Kinik Grinding wheels

We can offer to you various types of grinding wheels from Kinik, Taiwan. Kinik is a large grinding wheel manufacturer with very good reputation. Please give us your grinding wheel specs so that we can work out a proposal for you.

Kinik grinding wheel

Crystec Technology Trading GmbH will be pleased to further discuss details with you.
Content Content
Page
E-Mail Are you interested in further information?
Please contact us!
Back to the Top of the Page Top of
Page