Applications
Properties
|
|
Gazogène pour gaz endotherme, pour recuire, durcissement et fritter de l'acier.
JTEKT Thermo Systems est représentée en Europe par
|
Endothermic gas or endo gas is used for the thermal treatment of metals as a
protective gas. It can be generated in an endothermic gas generator by burning natural gas, consisting mainly of methane or other
hydrocarbons with heavy lack of oxygen. The reaction takes place at the surface of a catalyst under external heating at
around 1000°C. The process needs energy supply and is therefore endotherm.
2 CH4 + O2 → CO + 4 H2
Carbon monoxid and rather high amounts of hydrogen are formed. Nitrogen from the air is of course also available in larger quantities
and can be further increased in order to dilute the hydrogen content. Carbon dioxid, water and unburnt hydrocarbons are included only
in small amounts. Formation of soot can be avoided by selecting proper process conditions.
Hydrogen and carbon monoxide are reducing agents and avoid oxidation or corrosion of metal surfaces in a furnace.
It has to be taken into account however, that carbon monoxid increases the carbon content of steel. Endothermic gas can therefore be
used for surface hardening of steel by carbonisation or carburization. Carbon concentration can be increased up to the saturation level
of austenite in surface close areas (around 1mm deep).
JTEKT Thermo Systems (previously Koyo Thermo Systems) can offer endothermic gas generators for the usage in industrial furnaces. JTEKT is a famous manufacturer
of industrial furnace and has therefore much experience with design and adaption of gas generators.
| Gazogène pour la production de gaz endotherme | |||
|---|---|---|---|
|
Further gas generators for the formation of exothermic gas and forming gas are also available.
JTEKT Thermo Systems et Crystec sont prêts à étudier pour vous, le système qui répondra à vos exigences en présentant le meilleur rapport qualité / prix.
